Gel-bead eye mask
Full-width mask with visible gel beads, a plush reverse side and an adjustable hook-and-loop strap.
Selection detail: Check the complete mask on a sample, including strap overlap and the contact-side finish.
Gel Bead Ice Packs
Reusable masks, wraps and pads for wholesale and private-label orders.
Source an existing gel-bead format or discuss a custom version with Cryozin. Compare the shape, contact surface and fastening first, then define the artwork, packaging and sample requirements for your product range.
MOQ by format and order unit · Existing-product samples: 3–7 business days
Browse product details
Find the right gel-bead format
The six products below differ in coverage, fastening and contact-side construction. Start with the shape your range needs; use the comparison below to narrow the specification.
Eye masks
A wearable format for personal-care and beauty product ranges. Review eye coverage, nose clearance and the fit of the adjustable strap.
Wrist & joint wraps
Fastening is part of the product specification, not an accessory detail. A dedicated wrist wrap and a general contoured pad use different ways to hold the pack in place.
Wrist wrap with thumb opening
A shaped gel-bead pad with a narrow hand band and a wider wrist band.
Selection detail: Compare thumb-opening position, strap routing and adjustment range.
Contoured joint wrap
A chambered gel-bead pad with one long strap, shown in several joint placements.
Selection detail: Select the intended body area before confirming pad dimensions and fastening range.
Breast & perineal pads
Formats for maternity and postpartum-care product programs. The geometry, cover and pieces per set need to match the intended kit.
18 cm round breast pads
Full-round gel-bead pads with an integrated plush contact side.
Selection detail: Distinguish attached backing from a separate cover when comparing quotations.
U-shaped breast pads
Open-center gel-bead pads with removable soft covers.
Selection detail: Review the center opening, cover fit and quantity of pads and covers per set.
Slim perineal pad
A 24.5 × 7.5 cm gel-bead format with a removable sleeve option.
Selection detail: Specify pad-only or pad-plus-sleeve; do not assume both are included.
Compare the construction before you request samples
A similar color or outline does not make two packs equivalent. These are the differences to carry into your shortlist and quotation.
| Format | Shape & fastening | Contact surface | Key buying decision |
|---|---|---|---|
| Eye mask | Full-width mask; adjustable strap | Plush reverse side | Coverage, nose clearance and strap fit |
| Wrist wrap | Thumb opening; hand and wrist bands | Contact face not specified publicly | Opening position and two-band adjustment |
| Joint wrap | Contoured chambers; one long strap | Reverse face shown; material unverified | Intended body area and fastening range |
| Round breast pad | 18 cm full-round pad | Integrated plush backing | Full-round coverage and pieces per set |
| U-shaped breast pad | Open-center pad | Separate soft cover | Opening geometry and removable cover fit |
| Perineal pad | Slim 24.5 × 7.5 cm format | Sleeve option | Pad-only versus pad-and-sleeve configuration |
Published sizes: 18 cm round breast pad; 24.5 × 7.5 cm slim perineal pad. For the other formats, request a dimensioned drawing and filled-weight target before comparing quotations. Confirm pieces per set, preparation instructions and final pack-out for the selected product.
Gel beads or smooth gel?
Gel-bead packs contain visible beads; smooth-gel packs use a continuous gel filling. For sourcing, compare the finished product rather than choosing from the filling name alone.
Ask to review each sample with its intended cover, at the same preparation conditions. Check how it sits, how the filling is distributed and how easily the pack can be positioned. Neither filling name alone establishes cooling duration or flexibility after conditioning.
Custom gel bead ice packs: what to specify
Use an existing format as a starting point. The available changes depend on its construction and the sample review; not every option applies to every product.
Color & artwork
Share bead-color references and logo artwork. Review placement and legibility on the actual pack, including seams, textured surfaces and strap overlap.
Packaging & set composition
State how many pads, covers and straps belong in one saleable unit. Include required packaging dimensions, barcode placement and any assortment plan.
Instructions & market requirements
Identify the destination market and intended use. Agree on preparation, care and labeling for the exact configuration and request the relevant supporting documents.
Explore individual customization options or plan a coordinated product and packaging project.
Check the sample as a complete product
A pad that looks right on its own may fit differently once its cover or straps are added. Keep the approved product, accessories, instructions and packaging together as one reference.
Dimensions and coverage
Compare the outline, openings and usable area with your drawing. Record the measurements that matter for the intended fit, not just the maximum length and width.
Seams and filling
Inspect the sealed perimeter, chamber layout and visible bead distribution. Agree on appearance criteria and the inspection method for the selected construction.
Fit after preparation
Following the product-specific instructions, review positioning, strap adjustment and cover fit. Record the preparation conditions so later comparisons are meaningful.
Retail pack-out
Check that the unit contains the agreed pads, covers and accessories. Match artwork, instructions and labels to the approved version.
MOQ, samples and lead times
Confirm MOQ and the order unit for the selected model, size and configuration. Breast-pad quantities are counted in sets; specify the pads and covers included in each set. New-development timing is confirmed separately.
For an existing-format bulk order, start with the product link and quantity. Our wholesale sourcing page explains the broader purchasing route.
- MOQ
- Confirmed for the selected configuration
- Design renderings
- 1–3 business days
- Existing-product samples
- 3–7 business days
- Standard production
- 18–25 business days
- Custom products
- Longer production lead time, confirmed by project
Gel-bead sourcing FAQs
Practical questions to resolve before you approve a product or compare quotations.
Are all gel-bead packs suitable for hot and cold use?
Do not apply one product’s preparation method to the whole range. Confirm permitted cooling and any warming method for the selected construction, together with its cover and care instructions.
Is a plush backing the same as a removable cover?
No. An integrated backing is part of the pad; a removable cover is a separate component. This affects set composition, fit and care instructions. The round breast pad shown above has attached plush backing; the U-shaped pad uses a separate cover.
Can I use the same joint wrap for several body areas?
The contoured wrap is shown in several placements, but the intended area and fit requirements still need to be specified. Check coverage and strap adjustment on the sample instead of assuming one configuration fits every use.
Can the color, logo or packaging be customized?
Share your color references, artwork and packaging brief with the selected product. Available changes depend on its construction and sample review. For sets, include the number of pads and covers as well as the outer packaging requirements.
What documents should I request?
Tell us the destination market, intended use and documents your purchasing team needs. Ask for documents tied to the relevant product, material or configuration; a company-level document does not establish the same scope for every item.
How can I compare quotations accurately?
Compare the same dimensions, filled weight, backing or cover, fastening, pieces per set, artwork and packaging. Keep sample requirements and destination consistent. Otherwise a lower quotation may describe a different product or pack-out.
Request a gel-bead ice pack quotation
Send the product link or a reference image, quantity and destination market. If you are still comparing formats, tell us which options you are considering.
Cryozin · Dongguan Zejin Biotechnology Co., Ltd.
Include these details if available
- Product format, dimensions and quantity
- Backing, removable cover or fastening requirements
- Color, logo and packaging brief
- Pieces per set and required variants
- Target market, schedule and document requirements
An existing product link is enough to start the discussion; you do not need a completed specification to contact us.
