Product Details
Full-Head Hot Cold Gel Cap with Lower Face Opening for Private Label
A pull-on full-head gel-cap format with a lower face opening, intended for cold or gentle-warm personal-care routines according to the final approved instructions. The current gallery establishes the overall shape and displayed black color; cap dimensions, fit range, internal gel-panel layout, materials, repeat-use status and preparation method must be confirmed against the approved sample and specification. Neutral artwork and retail packaging are reviewed for the project.
For private-label sourcing, share your target quantity and retail packaging brief for this full-head hot cold gel cap with lower face opening. Branding, labeling and final configuration are confirmed for the project.
- Harry Huang
- +86 15992718044
- harry@zejinbtg.com
Full-Head Gel-Cap Format with a Lower Face Opening
This pull-on gel-cap format surrounds the upper head and extends over the forehead and eye area, with a lower central opening visible in the current sample images. It is intended for cold or gentle-warm personal-care routines using instructions approved for the final construction.
The gallery establishes the overall cap shape and displayed black color. It does not establish a measured coverage percentage, universal fit, internal panel map, exact materials or conditioned performance. Those items should be defined in the drawing, sample and specification rather than inferred from marketing graphics.
Visible format and project confirmation points
| Format | Pull-on full-head gel-cap format with lower central face opening |
|---|---|
| Displayed color | Black sample shown; standard and project colors to be confirmed |
| Coverage map | To be confirmed by approved drawing and sample |
| Fit range | To be confirmed by dimensions and representative fit review |
| Construction | Exact fabric, laminate, gel-panel layout, filling and seams to be confirmed |
| Use mode | Cold or gentle-warm routine following approved exact-product instructions |
| Artwork | Neutral standard artwork or project artwork to be approved on the real sample |
| Packaging and documents | Confirmed for the final configuration, channel and destination market |
Why the Coverage Map and Face Opening Need Approval
A full-head label does not define where gel panels begin and end. The drawing should show the front, side, crown and rear zones, panel boundaries, seam positions and any areas without filling. The lower opening should be measured at rest and under the intended fit condition.
Buyers should also evaluate visibility, nose clearance, edge position and loaded thickness on representative samples. These checks define the product more accurately than a universal-fit or percentage-coverage slogan.
Sample Checklist for the Complete Cap
- Confirm geometry: approve cap height and width, lower opening dimensions, edge shape, panel map and seam locations.
- Review fit range: record the intended head-size range and assess opening alignment and edge position on representative samples.
- Inspect the internal layout: verify panel placement, fill distribution, thickness, weight balance and seam appearance.
- Evaluate the prepared sample: check handling, panel movement, surface condition and fit using only the proposed approved preparation routine.
- Approve artwork and labels: verify neutral product wording, logo position, instructions, warnings and destination-market language.
- Approve pack-out: confirm pieces per set, pouch or box, instructions, barcode, product protection and carton configuration.
Artwork and Intended-Use Review
Product artwork, the page title, image text, alt text, instructions and retail packaging should use the same approved identity. Condition-specific or outcome wording must not be carried forward from the current images without applicable exact-product evidence and documented human compliance approval.
Share the destination market, sales channel, intended routine, target fit range, neutral artwork and packaging brief through Cryozin’s customization process. Final feasibility and instructions remain subject to sample and specification approval.
Quality and Documentation Scope
The approved sample and specification should become the product reference. Depending on the agreed construction, project controls may include cap and opening dimensions, panel position, fill distribution, seam appearance and integrity, surface condition, artwork, component count, labels and pack-out.
Cryozin’s quality-control process explains how project-specific checkpoints can be defined. The material-selection guide is a general buyer resource and does not establish SKU 971’s fabric, filling, performance or safety properties. Documentation and testing scope must match the final construction and destination market.
Full-Head Cap or Smaller Targeted Mask?
| Selection point | Full-head cap format | Smaller mask format |
|---|---|---|
| Physical format | Pull-on cap surrounding multiple head zones | Smaller product positioned over a limited face or eye area |
| Key drawing decision | Panel map, lower opening and fit range | Mask outline, eye opening, strap and contact side |
| Sample focus | Weight distribution, opening alignment and coverage boundaries | Localized fit, strap adjustment and edge position |
| Packaging | Larger folded cap and instruction set | More compact mask presentation |
Choose by required physical coverage, fit method and pack format. Do not select either format on the basis of an unsupported outcome promise.
Prepare a Cap Development Brief
Provide the destination market, sales channel, intended routine, cap and opening dimensions, target fit range, panel/coverage concept, neutral artwork, packaging files and testing or labeling requirements. Review the cold-compress cap category and Cryozin company information for additional sourcing context.
Product FAQs
How should a full-head cap fit sample be specified?
Provide the head-size range and required front, side, crown and rear coverage. Check the lower-face opening, panel boundaries and edge placement on representative samples.
Is the cap offered in a universal size?
A universal fit range is not established. Agree the cap and opening dimensions and the intended adjustment or stretch range before approving size labels.
Can preparation instructions be copied from another cap?
Use instructions approved for this cap’s actual fabric, laminate, filling and panel construction. Review preparation, handling, care and storage together with the sample.
What is needed for private-label packaging?
Send the artwork, intended use, market and pack contents. Approve the drawing, contact layers, labeling and any proposed claims for the final construction.
What are the MOQ and sample lead time?
MOQ is assessed per product model. Confirm the applicable quantity for the selected dimensions and configuration in the quotation. Samples take 3–7 business days; regular production takes 18–25 business days. Custom projects can take longer, with timing confirmed individually.
Buyer resources for this product type
Use these guides to define specifications, samples and approval criteria before requesting a production quotation.








