Choose chiropractic ice packs by the complete product a patient will take home: the filled pack, any cover or strap, the practice artwork, and the instructions. An unprinted reusable pouch, a pack carrying the clinic’s logo, and a boxed retail kit are different purchases. Compare them as separate configurations before asking for a bulk price.
This guide is for practice groups, chiropractic-supply distributors, and brands planning a repeatable take-home range. Start with the delivery format below, then use the sample card to approve a product that can be quoted, printed, and supplied consistently.
Go to the branded-pack sample brief
On this page
Compare three chiropractic ice pack programs
Separate the clinical team’s product requirements from the branding decision. Decide the required coverage, handling, and preparation first; then choose how the practice will present the approved product.
| Program | What the order contains | What changes the buying decision |
|---|---|---|
| Unprinted reference pack | The selected filled pack and its agreed instructions; a cover, strap, or retail box is included only if quoted. | Useful when the existing format already meets the brief. Compare the finished pack and quantity unit, rather than assuming accessories shown elsewhere are included. |
| Practice-branded pack | The approved pack plus a defined logo, artwork, and print position. | Check the design minimum, print method, setup charges, and readability on the filled sample. A different practice logo may create another design rather than share one print run. |
| Finished take-home or retail kit | The specified pack, selected cover or fastening, printed information, and approved bag or box. | Compare a complete packed unit. Confirm component counts, assembly, instructions, and retail labeling before approving the box or ordering cartons. |
For a small order, compare a distributor’s ready-made case with a manufacturer’s made-to-order program. Their minimums and included work can be very different. Cryozin quotes the selected production configuration; a case quantity offered by another seller is not its manufacturing minimum.
Approve the filled pack before choosing the logo size
Use a model number or a reference sample to establish filled dimensions, filling, surface construction, and the intended coverage. A flat outline alone does not show how the pack will feel after preparation or how its edge will sit against a cover.
In one Cryozin development project, a buyer changed a PVC pack with standard gel to TPU with a cold-flexible formulation because the priority was a softer prepared product. The useful acceptance requirement was “still bends after freezing”. For a new program, record the preparation condition and compare that behavior on the actual sample; do not assume every TPU or blue gel pack behaves the same way.
Another project used a fabric cover and strap because a bare pack felt too cold in use and could not stay where the customer wanted it. That manufacturing experience makes the cover, fastening, and filled pack separate approval items. It does not establish a clinical application temperature or treatment schedule.

Start with the Jiaji-fabric rectangular gel pack when a simple pouch format fits the brief. If fastening is needed, compare the complete gel pack, mesh sleeve, and adjustable strap. These are specific construction options to sample, not interchangeable kits.
Close the logo cost and order minimums together
For Cryozin’s regular pack models, the normal minimum is 500 pieces without printing and 1,000 pieces per design with printing. Very small models can start at 1,000 pieces even without printing. Confirm the selected SKU and sales unit in the quote; these rules do not create a shared minimum across different products or artwork.
A single logo for a practice group is a different request from several practice-specific designs. Send the quantity against each design. If custom color boxes are required, the usual box minimum is 1,000, including projects with an unprinted pack. For kits, state the number of retail packs and everything inside each one.
Match the artwork to the approved surface
- Screen printing: Cryozin’s current offering uses solid colors. Additional colors add cost. The sample screen can be reused for the following production run in the same project; this is not a lifetime waiver for future reorders.
- Offset printing: the setup charge is USD 300 per artwork each time printing starts, including printed samples. A later production run has its own setup charge, and extra spot colors cost more.
- Digital printing: a route for multicolor or gradient work on suitable polyester, Lycra, or nylon surfaces, including approved fabric-to-PVC/TPU constructions. Do not assume the same process is available directly on bare plastic film.
For example, one offset artwork printed for samples and printed again for production incurs two USD 300 setups: USD 600 in setup charges before product, printing-unit, packing, or freight costs. Treat that as a stated charging rule, not a complete quotation.
We have also seen very fine lettering lose definition or show misalignment on soft plastic. Approve the logo at its actual printed size on the chosen surface and filled pack. An enlarged digital proof cannot settle that question. Use the printing-method comparison to prepare the brief, then approve the physical sample.
Send your pack reference, artwork, and quantity per design for a sample and printing quote.
Approve instructions and packing as one take-home product
Keep preparation, application, care, and replacement information with the product the patient receives. Have the practice’s clinical lead review the intended use and instructions for the selected pack. Do not add a treatment claim or copy another product’s heating settings simply because the practice logo is being added.
For products marketed as medical devices in the United States, FDA’s general labeling provisions address the named business, intended use, directions, and the visibility of required information. This is a reason to approve the pack, insert, and box together; it is not evidence that a catalog pack is FDA-approved.
Labeling reference: FDA general device-labeling requirements
Cryozin has adjusted customer-supplied instructions, warnings, and languages for packaging projects. The revised artwork goes back to the buyer for confirmation before printing. Ask for a packed sample with the actual product, cover, instructions, and box so the team can check fit, opening, and readable text as one unit.

Separate take-home supply from shared clinic stock
For packs that remain in a shared clinic supply, use the clinic cold-pack format comparison to review coverage, cleaning, and stock rotation. Keep the take-home brief below for the product handed to one patient.
Mark whether an item leaves with one patient or returns to a shared clinic supply. The CDC advises cleaning and maintaining medical equipment according to manufacturer instructions to prevent transmission between patients. For a shared product, ask the supplier for written care instructions and have the clinic confirm compatibility with its cleaning procedure.
Care reference: CDC guidance on patient-care equipment
In Cryozin’s removable-cover configurations, an approved textile cover can be washed separately from the gel pack. Machine-wash permission for a detached cover does not apply to a gel-filled assembly, nor does “washable” prove compatibility with a clinic’s disinfectant. Confirm the selected construction and its instructions rather than borrowing a care statement from another model.
Copy this take-home pack sample card
Chiropractic practice-branded pack brief
- Program: [practice group / distributor / brand], [target market], [take-home handout / retail sale].
- Pack: [model or reference], [filled dimensions], [surface and gel], [required behavior after specified preparation].
- Delivered unit: [packs per unit], [cover], [strap], [instructions], [bag or box], [retail units per carton].
- Branding: [quantity per design], [print surface and position], [solid colors / multicolor artwork], [readable sample to approve].
- Approval: [complete packed sample], [practice review of intended use and instructions], [material, appearance, print, and packing confirmation].
- Quote: [sample and tooling], [print setup per run], [unit price], [packing and assembly], [destination and requested delivery date].
Keep a copy of the approved configuration with the order. This is an editorial purchasing tool; it does not replace the practice’s patient instructions.
Questions before a sample or repeat order
Are branded samples free?
Existing reference samples are free, with freight paid by the buyer. Logo work, new artwork, and additional testing are separate items to confirm. For a newly tooled project, payment of the mold fee can cover six functional samples of the same model and specification; that does not automatically include printed or tested samples.
What should stay fixed when ordering again?
Retain the agreed pack, print, and complete packing sample. Cryozin and the customer keep approved samples. Material or supplier changes requiring review are checked with a new sample; after approval, the business team updates the ERP and order record. An unchanged product mold can be reused, while printing charges follow the agreed process for that order.
When does the production lead time start?
Regular production is normally 18–25 business days from receipt of the deposit; custom development can take longer. Complete the required sample and artwork approvals through the project process and confirm the schedule in the quotation. A sample-development estimate is a separate stage, not an automatic total delivery promise.
Request a quote for the complete practice-branded product
Send the pack reference, quantity per design, proposed logo, required cover or strap, packing, destination, and intended channel. Cryozin can then review the custom ice pack configuration or the unprinted bulk-supply route against the same delivered unit.

