Size a dog crate cooling mat from the usable inside floor and the finished mat dimensions. If you sell pet accessories, make the size table reference the crate floor and the exact accessory SKU so customers can compare them before buying. A crate’s nominal size label helps locate a model, while the dimensions of its actual tray tell you whether a selected mat can lie flat.
For a retail size range, compare the smallest usable tray footprint with the largest acceptable finished mat, then check the corners and door with a physical sample before printing a compatibility claim.
On this page
Measure the space the mat will actually occupy
Put the tray, divider, or bed base into its intended position. Measure inside the raised tray edges at the narrowest usable points. Note rounded corners, ridges, and door clearance. If the crate comes with a divider, record the tray fit for the approved divider position. For a bed insert, measure the flat base inside the bed or its cover and record the opening the insert has to pass through.
Measure the filled mat flat from edge to edge including the seam or binding. Record thickness at any spot that might interfere with the door or divider. Try the sample inside the exact crate or tray and then open and close the door. As a retail example, Dazy Dog’s crate-mat sizing instructions tell customers to compare the crate’s internal floor with the mat dimensions. Use the finished dimensions of your own sample for your chart.

Compare two mat formats and a bed insert
| Format | Where it fits a product line | What to approve on the sample |
|---|---|---|
| Flat, one-piece mat | A simple rectangular footprint for a tray that accepts the full mat. | Finished overall dimensions, corners, flatness, and care instructions. |
| Foldable, segmented mat | A product sold as a folding format where storage or packing matters. | Sample lies flat after unpacking, fold lines clear tray ridges, and packing orientation matches the written spec. |
| Cooling insert for a bed | An add-on sold against an identified bed or base size. | Insert passes through the opening, lies flat on the base, and matches the labeled bed size. |
Cryozin’s three-panel mat is one format to sample when folding matters. Its confirmed shipping fold is a Z-fold. The single-piece pet-bed insert goes directly onto a compatible bed base. Each format needs its own approval if you plan to list compatibility with particular crate trays or beds.
Buyers comparing wholesale pet cooling mat formats can shortlist a mat from the catalog, then record its reference and finished dimensions in the fit chart below.

Build a fit chart from samples
Use one row per tray and mat pairing in your own records. A 30-inch crate label helps shoppers identify the model. The sample measurements below show what to check before listing compatibility.
| Fit check | Example record | What to record for your SKU |
|---|---|---|
| Usable tray | 28 × 17 in inside the raised lip. | Tray model, divider position, and narrowest usable length and width. |
| Maximum finished mat | 27½ × 16½ in, seam included. | Approved maximum finished size, edge shape, and thickness where the door passes. |
| Physical approval | ½ in total clearance on each axis before checking corners and door travel. | Sample revision and whether the mat sits flat and the door and divider clear it. |
The example dimensions are for illustration. Approve clearance on the actual crate with the filled mat in place.
- Crate or bed ID — model, tray version, and divider position if applicable.
- Usable space — inside length and width, corner shape, raised lip, and door or cover clearance.
- Mat SKU and revision — finished length, width and thickness, edge profile, and approved fit.
- Retail handoff — dimensions on packaging, care and supervision instructions, carton marking, and how a replacement will be ordered. Give each finished-size and retail-pack version an identifier linked to its approved sample and fit-chart row; keep the quantity for each version visible in the quote.
Use a fit check to substantiate model compatibility. Review any cooling-duration, care, or durability claim separately against the version you will sell. The American Kennel Club’s crate guide covers crate selection for the dog itself. Use that decision separately from the mat-to-tray matching exercise.
Keep that fit record with the approved sample for reorders. If a material is discontinued or a new material batch needs review, Cryozin sends a new sample for comparison with the buyer’s retained approval sample. After the buyer approves the change, the material and supplier records in the order system are updated and a new signed sample is retained. Recheck the finished dimensions and crate pairing when the change could affect fit; an unchanged size name does not establish unchanged compatibility.
Questions pet product buyers ask
Can one mat size cover several crate models?
Yes, when each tray has been checked for usable floor space, corners, and door clearance with the same approved mat. List the models you have checked and print the finished mat dimensions for other buyers to compare.
Which dimensions should go on the label?
Use the overall finished mat dimensions. If the pack contains a bed insert or carries a crate-size compatibility claim, make that distinction visible near the dimensions.
Cryozin’s confirmed MOQ for Pet Cooling Mats & Pads is 300 pieces per product, including printed pet-mat projects. For a multi-size range, list each finished-size and packaging version with its proposed quantity and ask how the order will be allocated. Do not assume that several sizes, products, or artwork versions can be combined to reach one minimum.
For a retail or private-label size range, send the mat reference, usable tray dimensions, a photo of the tray and door, and the quantities you expect per finished size.

