Product Details
Refillable Shoulder Ice Wrap with Screw Cap and Chest Strap
The refillable bag follows the shoulder and upper-arm area, with a large screw-cap opening near the top and a strap crossing the torso. It is a different assembly from a sealed gel shoulder pack. Confirm the selected size, components and packing for an OEM quotation.
- Harry Huang
- +86 15992718044
- harry@zejinbtg.com
Combine a Shoulder Pattern with a Direct Fill Port
The refillable bag follows the shoulder and upper-arm area, with a large screw-cap opening near the top and a strap crossing the torso. It is a different assembly from a sealed gel shoulder pack. Define the shoulder pattern and cap position before selecting a size range.
Define the Selected Configuration
| Coverage | Contoured shoulder panel with an upper-arm section. |
|---|---|
| Design reference | Approx. 40 x 30 cm (unfilled shoulder-bag body height x maximum width, excluding cap and straps). Proposed custom-design starting point only; not a measured stock size or an approved fit. Final dimensions require sample approval. |
| Fill port | Large screw-cap opening near the upper shoulder. |
| Retention | Chest crossover strap and the selected arm fit. |
| Layout | Agree side, size, loading amount and components per unit. |
| Thermal use | Cold and warm configurations; refrigerator/freezer preparation is specified for the selected bag, filling medium and cap assembly. |
| Loading amount | Specify the filling medium and loading quantity for the selected bag and cap assembly. Capacity and permitted preparation are confirmed for the approved design; no fixed gel fill weight is specified. |
| Supply unit | One pair (two complete refillable shoulder bags) per supply set. |
| MOQ | 500 paired sets per product model. Confirm the selected configuration and packaging in the quotation. |
Check the Assembly in Its Loaded Form
Review how the filled bag sits across the shoulder, where the cap is reached and how the chest strap adjusts. Inspect the bends around the upper-arm section together with the seams and opening interface. Use the approved loading amount for the fitting review.
- Left/right orientation and upper-arm coverage.
- Chest strap route, anchors and fastening overlap.
- Cap access, tether and interface sealing.
- Filling, draining, drying and individual packing.
Develop the OEM Specification
Send a reference, approximate dimensions, target market and packing brief. Cryozin can assist with the outline drawing, structural review and sampling. Materials, gel construction, colors, printing and fastenings are assessed against the selected design. New tooling and packaging costs are quoted separately as applicable.
Approve dimensions, materials, color, logo and packaging before production, and retain the agreed sample for comparison. Inspection photos, videos and reports can be discussed for the order; any temperature, duration or market-specific claim needs evidence for the selected finished configuration.
Compare the shoulder ice packs & wraps range, review the OEM and private-label process, or discuss quality checkpoints.
Product FAQs
Is this the same as the sealed gel shoulder wrap?
No. This selected bag is loaded through a screw-cap opening. The prefilled gel shoulder format has a different filling and preparation method.
Can it be specified for either shoulder?
Confirm the required side or reversible pattern, cap access and strap route. The proposed 40 x 30 cm unfilled body outline is a custom-design starting point, not a measured stock size or an approved fit. Agree the filling medium and loading quantity, then approve a fitting sample in the selected orientation.
Is hot-water use included?
Cold and warm configurations are available. Confirm the permitted warming method, filling medium and preparation instructions for the selected bag and cap assembly; no water temperature or heating procedure is specified here.
Can replacement caps or straps be included?
Include spare-component requirements in the quotation. Confirm compatibility with the approved thread, tether and fastening system before adding replacement items to a retail kit.
What are the MOQ and sample lead time?
MOQ is 500 paired sets per product model, with two complete refillable shoulder bags per set. Confirm the selected configuration and packaging in the quotation. Existing-model samples normally take 3–7 business days; a newly tooled version requires its own development schedule. Regular production takes 18–25 business days, while custom projects may require longer.
Buyer resources for this product type
Use these guides to define specifications, samples and approval criteria before requesting a production quotation.
