Product Details
Nylon Gel Cooling Mitten with Wrist Strap for OEM Orders
Nylon gel cooling mitten with an integrated hand pocket and adjustable wrist strap. Review the reference size, hand orientation, pack quantity and logo placement for your OEM order. Standard MOQ: 500 pcs.
For OEM orders of this nylon gel cooling mitten with wrist strap, provide the required quantity, specification and packaging brief so the sample and quotation scope can be confirmed.
- Harry Huang
- +86 15992718044
- harry@zejinbtg.com
Review the inside pocket as carefully as the outside dimensions
This nylon gel mitten has an integrated hand-insertion pocket, a smooth outer panel and an adjustable fastening near the wrist. The rounded finger area encloses the fingers together, while the side projection follows the thumb area. It is a different construction from a thick quilted mitten or a glove with individual finger sections.
The listed outer dimensions are 21.5 × 26.5 cm. Use these as a reference for sample discussion, then verify the measurement method and usable inner pocket. Check finger clearance, thumb placement and the wrist opening with the intended hand size. Outer length alone does not establish the internal fit or the supplied hand orientation.
Configuration and order details
| Outer material | Nylon fabric, as listed for this configuration |
|---|---|
| Filling | Gel-filled construction |
| Hand entry | Integrated pocket with wrist fastening |
| Listed outer size | 21.5 × 26.5 cm; confirm the drawing and measurement method |
| Packing decision | Confirm single-mitten or paired set contents and hand orientation |
| Standard MOQ | 500 pcs; quotation to define the order unit and complete retail set |
Sample checks for this construction
- Measure the outside panel and the usable hand-insertion pocket separately.
- Check finger and thumb clearance with the wrist closure engaged.
- Inspect the perimeter seams, pocket entry and strap attachment.
- Assess the prepared sample for handling, surface condition and fit.
- Approve the exact preparation instructions, hand identification and retail component count.
Define the OEM project
Send the destination market, intended use, expected quantity, size requirements, logo artwork and packaging brief. Approve the exact construction, instructions and component list before production. Custom options and documentation are reviewed for the selected configuration and target market.
Standard samples take 3–7 business days; regular production takes 18–25 business days. Custom projects take longer, with timing confirmed for the project.
Compare related product formats in this category and review our OEM and private-label process. Request a sample and quote with the configuration and packaging requirements for your project.
Product FAQs
Does the listed size describe the usable inside pocket?
The listing gives a product size. Confirm the internal pocket measurements and hand fit independently during sample approval.
Is the mitten supplied as a pair?
Agree the quotation unit and retail set contents before ordering. Pair packing and left/right identification should be explicit in the packing list.
Which preparation instructions should be printed?
Use instructions approved for the selected nylon, filling and pocket construction. Review preparation method, limits and care wording for that configuration.
What are the MOQ and sample lead time?
MOQ is assessed per product model. Confirm the applicable quantity for the selected dimensions and configuration in the quotation. Samples take 3–7 business days; regular production takes 18–25 business days. Custom projects can take longer, with timing confirmed individually.
Buyer resources for this product type
Use these guides to define specifications, samples and approval criteria before requesting a production quotation.
