Product Details
Full-Face Gel-Bead Mask with Adjustable Straps for Private Label
A full-face gel-bead mask with eye, nose and mouth openings, one PVC face and one permanently attached plush textile face. Two elastic straps fasten with hook-and-loop closure. The mask remains soft after freezer preparation; confirm opening alignment, fit and preparation on the selected sample. The quotation excludes the illustrative extra small pack.
For private-label sourcing, share your target quantity and retail packaging brief for this full-face gel-bead mask with adjustable straps. Branding, labeling and final configuration are confirmed for the project.
- Harry Huang
- +86 15992718044
- harry@zejinbtg.com
Full-Face Mask Geometry with Separate Openings
This one-piece full-face mask has separate eye, nose and mouth openings, a plush textile face and a PVC face, with gel beads inside. Two elastic straps fasten with hook-and-loop closure. The plush is permanently attached, and either face can be used against the face under the approved preparation instructions.
Face coverage is a geometry and fit decision. It does not establish a cosmetic, medical or relaxation outcome. The approved drawing should define the mask outline, opening positions, strap arrangement and contact surfaces for the intended project.
Format and confirmation points
| Format | One-piece full-face mask with eye, nose and mouth openings |
|---|---|
| Displayed construction | Gel-bead filling with one PVC face and one permanently attached plush textile face. |
| Retention | Two elastic straps with hook-and-loop fastening; approve the selected adjustment range. |
| Mask and opening dimensions | To be confirmed by approved drawing and sample |
| Fit range | To be defined by dimensions and representative-fit review |
| Preparation and use mode | To follow approved exact-product instructions |
| Artwork and colors | Project options subject to feasibility and sample approval |
| Packaging and documents | Confirmed for the final construction, channel and destination market |
Approve the Openings and Strap Range as One System
The overall width does not define facial alignment. The drawing should show eye-opening size and spacing, nose and mouth clearances, edge position, strap attachment points and the adjustment range. Sample review should record how these features align across the intended fit population without calling the product universal-fit.
Both the plush and PVC faces can be used against the face. Approve the selected surface finish, edge construction and cleaning instructions. The quoted face mask does not include the small extra ice pack shown in the promotional illustration.
Sample Checklist for the Full-Face Mask
- Confirm the full outline, eye spacing, eye/nose/mouth openings, edge radii and tolerances.
- Record strap length, adjustment range, closure overlap, attachment position and attachment construction.
- Approve the exact film or textile surfaces, bead/fill specification, fill distribution and seam map.
- Evaluate alignment, field of view, opening clearance and edge position on representative samples.
- Assess the sample after the proposed preparation routine using approved thermal, seal and repeat-cycle methods.
- Approve instructions, warnings, care, storage, artwork, labels, pieces per set and pack-out.
Preparation and Claims Need the Exact Construction
Cold or gentle-warm preparation depends on the final surfaces, filling, seams, closure components and packaging. The approved instructions should define the allowed method, handling checks, warnings and application guidance. Do not copy microwave, freezer, time or temperature language from third-party graphics.
Likewise, flexible-after-conditioning, temperature-retention, leak resistance, repeated-use and material-safety wording should be tied to the exact production-equivalent sample and applicable evidence. Cosmetic or condition-specific outcomes require a separate claims and compliance review.
Customization and Quality Scope
Send the intended market, mask drawing, target fit range, construction, artwork and packaging through Cryozin’s customization process. Color, logo, surface and pack format are reviewed for feasibility; final choices are approved on the actual sample.
The approved sample and specification can define checkpoints such as outline and opening dimensions, bead/fill distribution, seams, surfaces, strap measurements, closure operation, artwork, labels and pack-out. Cryozin’s quality-control process describes the workflow, not a product-specific test result.
Full-Face Mask, Eye Mask or Under-Eye Pair?
| Selection point | Full-face mask | Full-width eye mask | Under-eye pair |
|---|---|---|---|
| Physical format | One face-shaped piece with multiple openings | One smaller piece spanning both eye areas | Two independent curved pads |
| Retention | Two elastic straps with hook-and-loop closure | Two elastic straps with hook-and-loop closure | Individual placement without a shown strap |
| Key drawing decision | Face outline, all openings and strap range | Eye-area outline, nose contour and strap range | Pair symmetry and under-eye contour |
| Pack-out | Larger folded mask and instructions | Single compact mask | Matched two-piece set |
Keep these three physical entities separate and consolidate only cosmetic variants within each page.
Prepare a Full-Face Mask Brief
Provide the destination market, intended routine, face and opening dimensions, strap range, surface/fill concept, preparation target, artwork, packaging and required documents. Review the face-mask category and Cryozin company information for catalog and supplier context.
Product FAQs
Which face of the mask can touch the face?
Either face can be used: one is plush textile and the other is PVC. The filling is gel beads. Confirm the intended routine and preparation instructions for the selected configuration.
Will the mask become rigid after freezer preparation?
The reference gel-bead construction remains soft after freezing and can conform to the face. Sample fit should still be checked around the eye, nose and mouth openings.
How is the mask held in place?
Two elastic straps use hook-and-loop fastening. Approve their adjustment range with the mask outline and opening positions.
Can the plush layer be removed for washing?
No. The plush is permanently attached, although it can be cleaned. Do not treat it as a removable cover or infer machine-washing instructions for the gel-containing mask.
Is the small extra ice pack in the illustration included?
No. The quoted product is the selected full-face mask. The small pack shown in the promotional illustration is not part of the regular mask quotation.
What are the MOQ and sample lead time?
MOQ is assessed per product model. Confirm the applicable quantity for the selected dimensions and configuration in the quotation. Samples take 3–7 business days; regular production takes 18–25 business days. Custom projects can take longer, with timing confirmed individually.
Buyer resources for this product type
Use these guides to define specifications, samples and approval criteria before requesting a production quotation.
